Ceramic Hot Air Circulation Drying Oven Box Large Muffle Furnace For Heat Treatment
Product Specifications
| Attribute |
Value |
| Range of Applications |
Industrial |
| Type |
Electric Holding Furnace |
| Usage |
Ceramic Drying |
| Fuel |
Electric |
| Atmosphere |
Nitrogen |
| Effective Chamber Dimensions |
850*700*900mm(W*H*D) |
| Transport Package |
Wooden Packaging |
| Specification |
1440*1930*1080mm(W*H*D) |
| Trademark |
Chitherm |
| Origin |
China |
| HS Code |
8514101000 |
| Production Capacity |
50 Sets/Year |
Product Description
Chitherm HRF535-02 Hot Air Box Furnace for Heat Treatment Processes 1440*1930*1080mm W*H*D
Applications
Widely used in processes such as constant temperature drying, curing, and glue dispensing for electronic ceramics and other products.
Technical Specifications
- Rated Temp.: RT+10 ~200ºC
- Max Temp.: 300ºC
- Effective Dimensions: 850×700×900mm(W×D×H)
- Heating Method: Customized Heater
- Process Atmosphere: Nitrogen
- Temperature Control Stability: ±1ºC, with PID parameter self-tuning function
- Temperature Uniformity: better than ±3ºC (insulation 1 hour at 200ºC test)
- Thermocouple: Type K
- Temperature control points: 1
- Temperature monitoring points: 1 point
- Process Steps: 20 steps
- Exhaust: One exhaust port on top
- Alarm System: over temperature, thermocouple failure and other abnormal conditions will activate sound and light alarm protection
- Max Heating Power: 10kW
- Insulation Power: ≤ 5kW
- Surface Temperature Rise: ≤ 35ºC
- Weight: about 700kg
- Furnace Dimensions: about 1400mm×1930mm×1080mm(W×H×D)
- Appearance Color: light gray
Delivery List
| Item |
Note |
QTY |
| Basic Compositions |
Dryer |
1 PC |
| Certificates of Inspection |
Dryer and major purchased components |
1 Set |
| Technical Documents |
Manual instructions, technical documents of major purchased components, etc |
1 Set |
| Key Parts |
Heating Elements |
1 Set |
| Thermocouple |
WATLOW/THERMOWAY, Type K |
1 PC |
| Temperature Controller |
|
1 Set |
| Monitor |
Touch screen |
1 Set |
| Spares |
SSR |
1 PC |
Facility Requirements
Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong airflow disturbance.
Process air conditions: 99.999% purity nitrogen, pressure 0.2 - 0.4Mpa, gas consumption 5-15m3/h.
Ventilation system: non-contact access to the user pumping system, pumping capacity is greater than 15m3/h.
Ground requirements: level, no obvious vibration, bearing capacity >300Kg/m2.
Power conditions: capacity greater than14kVA, 3 phases 5 lines, voltage 220/380V, frequency 50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green.
Installation site: 2500mm×2100mm×3000mm (W×H×D), installation area greater than 5m2.
